Semi automatic 5gallon PET bottle stretch blowing machine
Semi automatic 5gallon PET bottle stretch blowing machine
The 5gallon blowing machine is specially designed to produce 5-gallon bottle and 25L wide mouth jar. Its output is up to 90 BPH for 5-gallon bottle and even could reach 120 bottles per hour in certain case.
One set machine consists of main blower unit and rotary infrared heater. The ordinary quartz lamp cannot heat preform ideally because the preform wall is excessively thick. The infrared heater with high penetrative force can heat the inside and outside of preform simultaneously and keep preform heating evenly, therefore high shaping quality.
One set machine consists of main blower unit and rotary infrared heater. The ordinary quartz lamp cannot heat preform ideally because the preform wall is excessively thick. The infrared heater with high penetrative force can heat the inside and outside of preform simultaneously and keep preform heating evenly, therefore high shaping quality.
The operator just need to take the preform from oven and put the heated preform into the bottle blow mold and press the switch, and then computer will stretch and blow air forming the preform into bottles. Blowing mold open, then operator takes out the bottle from mold. This is how semi automatic stretch blow molding machine works. Same for the small PET bottle blowing machine.
Features
1. Special design for PET Gallon Bottle up to 6 Gallon
2. Produce wide mouth jar up to 25 liter with neck size up to 200mm.
3. Using Infrared oven unit to achieve uniform heating throughout the wall of preform
4. Adopt special designed preform heating system to ensure the optimal heating effect for 730g thick-wall preform
5. Special designed fan-cooling system in the heating channels to keep the oven with constant temperature and ensure the preform can be heated completely.
6. Water cooling system ensures the quality of preform neck.
7. Up to 90 bottles/hour using one-cavity mold for 5-gallon bottle
8. Use advanced PLC control system with counting function and time-control precision to 0.01second, and a use-friendly panel.
9. Equipped with special designed air storage units
10. Simple installation & startup adjustment.
| Technical Parameters | |||
| HP-B20L | ITEM | UNIT | TECH. DATA |
| Max.Volume of Product | L | 20 | |
| Output | BPH | 100-120 | |
| Neck Size of Product | mm | <=160 | |
| Useful Area of Mould | mm | 420*660 | |
| Mould Thickness | mm | 350-420 | |
| Mould Stroke | mm | <=350 | |
| Clamping Force | KN | 80 | |
| Stretching Stroke | mm | 530 | |
| Working Pressure | Mpa | <=1.0 | |
| Blowing Air Pressure | Mpa | <=4.0 | |
| Power of Main Blower | KW | 2 | |
| Weight of Main Blower | Kg | 2500 | |
| Dimension of Main Blower | mm | 2800*720*2160 | |
| PRE-HEATER | Power of Pre-heater | KW | 16 |
| Weight of Pre-heater | Kg | 800 | |
| Dimension of Preheater | mm | 2200*750*1880 | |
