8Cavity fully automatic PET bottle blowing machine output 9600-10800BPH for 600ml

HT-L series fully automatic linear blow moulding machine is the most stable two-step fully-automatic pet stretch-blow moulding machine(preheat). It has two to eight cavities and the maximum capacity of the products is 2L. It can blow PET bottles for carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers.

The advantages

1. Automatic perform input and ready bottle output system.
Machine adopt with the overall structure of super-standard anti-vibration design, high-speed operation state of the machine will shake down to a minimum.

2. Machine adopts modular assembly method, greatly decrease the local amendments due to technological improvements when the machine is on processing.

3. The structure of machine oven adopt the international most advanced energy-saving technology of infrared radiation heating, temperature control with automatic negative feedback, closed-loop regulation model.

4. Automation controlling item adopts international high-end computer system, heating, collecting and measuring perform temperature with simulation input and output module.

5. Man-machine interface displays current production situation, available for on line switching, parameter modification and production accounting, with automatic alarm, automatic fault detection and diagnose.

• 1/Stabler
    
• 2/Higher Productivity
 
• 3/Reduced Energy Consumption
 
• 4/Less Investment
 
• 5/Cleaner
 
• 6/Simpler Machine Structure
 
• 7/Easier Operation & Maintenance
 
• 8/Easier and Faster Startup

• 1

  Preform Feeding

  • 

    Fully automatic preform feeding system

  • 

    Proper preform stabilization device

 
• 2

  Heating System

  • 

    Modular oven

   
  • 

    Fan system is installed for even heating.

  • 

    Customized oven dimensions based on preform and max bottle size

  • 

    Each lamp, each Lamp gripper and each lamp rod is separately adjustable.

• 3

   Preform Transfer

  • 

    Servo-driven system:More precise and faster to transfer preform.

  • 

    Special chain and chain connection guarantee chain system precision and extend chain system lifespan.

  • 

    Self-lubricating bushing and sealed bearings.

  • 

    Quick change of robot clips, mould & star-wheels(tool-less) for different bottle

• 4

  Clamping & Stretching System

  • 

    Toggle structure & pressure increase device:Faster and stronger clamping to avoid disconnected parting surface.

  • 

    Combination valve:Faster air inlet and very quick air exhaust.

  • 

    Individual cavity blowing, individual cavity stretching, individual cavity pre-blow are all separately adjustable.

  • 

    Inbuilt bigger air tank for higher output

  • 

    Unique low pressure air pressure monitor

  • 

    Special solenoid valve to cut power and outlet all air for safety is installed.

  • 

    To save energy and to avoid adverse effect on neighbouring cavities, relevant cavity does not blow if no preform in that cavity.

• 5

  Bottle Ejection

  • 

    Pneumatic cylinder for bottle discharge.

  • 

    Discharge on wind channel or belt conveyor.

    
    

    Technical Parameters-HT-L series
    CLAMPING SYSTEM	Model	Unit	HT-L4	HT-L4M	HT-L6	HT-L6M	HT-L8
    	Cavity Quantity	cavities	4	4	6	6	8
    	Clamping Force	KG	40000	48000	56000	65000	96000
    	Mold Stroke	mm	90	125	90	125	90
    	Stretching Rod Stroke	mm	260	330	260	330	260
    	Stretching Rod Dia.	mm	12	12	12	12	12
    	Bottom Mould Stroke	mm	50	50	50	50	50
    	Pitch Distance	mm	76.2	114.3	76.2	114.3	76.2
    	Preform Holder Quantity	PCS	96	96	106	106	152
    CONTAINER SPEC	IMax.Container Volume	ml	600	2000	600	2000	600
    	Max.Container Height	mm	260	350	260	350	260
    	Max.Container Diameter	mm	68	105	68	105	68
    	Max Preform Height	mm	100	140	100	140	100
    	Max.Neck Diameter	mm	38	38	38	38	38
    Output		BPH	4200-4500	4000-4200	6500-7200	6000-6500	9600-10800
    ELECTRICAL SYSTEM	Heating Oven Quantity	Zone	4	6	4	6	8
    	Number of Lamp	PCS	4*6	6*6	4*8	6*8	8*8
    	Heating Power	KW	48	72	64	96	128
    	Installed Power	KW	53	77	69.5	100	135
    	Voltage	Voltage	Customized	Customized	Customized	Customized	Customized
    	Actual Power	KW	25-30	30-35	30-35	45-50	60-70
    AIR SYSTEM	Operating Pressure	Mpa	0.7-0.9	0.7-0.9	0.7-0.9	0.7-0.9	0.7-0.9
    	Blowing Pressure	Mpa	2.5-3.0	2.5-3.0	2.5-3.0	2.5-3.0	2.5-3.0
    	High Pressure Air Consumption	L/min	3.6/30	4.8/30	4.8/30	6.4/30	7.2/30
    CHILLER SYSTEM	Temperature Range	Degree	9-13	9-13	9-13	9-13	9-13
    	Pressure	Mpa	0.4	0.4	0.4	0.4	0.4
    	Capacity	HP	5	5	10	10	10
    MACHINE	Machine Dimension	M	3.9*1.5*2.2	3.6*2.2*2.2	4.0*2.1*2.2	5.8*2.1*2.2	6.0*2.1*2.2
    	Machine Weight	KG	3500	4500	6000	7000	8000